2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.7 Installing the Printer Drivers
E2-45
(8) Specify the printer driver install folder
(C:/TEC_DRV) created in Section 2.7.4
Preparation for Installation, and click the [Open]
button. Select the “TEC.inf” and click the [OK]
button.
(9) The list of the installable printer is displayed.
(10) Select the model to be installed, and click the [Next] button.
(Example: B-SA4T)
(11) Select the “Replace existing driver”, and click the
[Next] button.
Supplement: This step will be omitted when the
printer driver is installed for the
first time.
To Next Page
Loading...
