2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.7 Installing the Printer Drivers
E2-53
2.7.8 Installation under Windows XP/Server2003 (USB with Plug & Play enabled)
(1) Turn on the PC.
Note: Log on as the user with administrative privilege.
(2) Turn on the printer, and connect it to the PC with a USB cable.
(3) “USB DEVICE” is detected, and the “USB Print Support” is automatically installed.
(4) After a while, new devices are detected.
(5) When the “Found New Hardware Wizard” is
displayed, select “Install from a list or specific
location [Advanced]” and click the [Next] button.
(6) Select the “Search for the best driver in these
locations”, check the “Include this location in the
search” checkbox, and click the [Browse] button.
Specify the folder (C:\TEC_DRV) created in
Section 2.7.4, and click the [Next] button.
(7) When the screen on the right appears, click the
[Continue Anyway] button.
To Next Page
Loading...
