Toshiba B-EX4T1 Series - Page 76

2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.9 Position and Print Tone Fine Adjustment
E2-62
2.9.1 Fine Adjustment(Cont.)
(2) CUT ADJ.
Cut position or peel-off position is shifted by fine adjusting the feed
amount.
• Example of Peel-off Position Fine Adjustment
When setting +3.0 mm
Compared with “+0.0mm” position, the peel-off
position is shifted forward.
When setting +0.0 mm
When setting –3.0 mm
Compared with “+0.0mm” position, the peel-off
position is shifted backward.
• Example of Cut Position Fine Adjustment
When setting +3.0 mm
Compared with “+0.0mm” position, the cut position
is shifted forward.
When setting +0.0 mm
When setting –3.0 mm
Compared with “+0.0mm” position, the cut position
is shifted backward.
50.0mm
-50.0mm
49.9mm
-49.9mm
Cut Position
Cut Position
Feed Direction
3
mm
3
mm
Feed Direction
Feed Direction
Cut Position
L
a
b
e
l
P
r
i
n
t
H
ea
d
Platen
Strip Plate
B
ac
ki
ng
P
ape
r
Feed Direction