INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33001A
(Revision Date: Jan. 19, 2006)
6. Real Time Clock: B-SA704-RTC-QM-R
6- 3
NOTES: 1. Place the battery with the “+” mark facing up.
2. A new battery is supposed to last about 2 years or more, but it varies depending on the
operating conditions. When a new battery is loaded, write down the battery replacement date
on a supplied battery sticker, and attach it to the reverse side of the Side Panel as a reminder.
4. Attach the Real Time Clock to the printer with the SMW-4x8 screw.
Reverse side of Side Panel
Battery Sticker
Real Time Clock
SMW-4x8 Scre
To Next Page
Loading...
