178 Network Administrator’s Guide — Setting up NetWare Print Server
7. Check the “Install to workstation in this container” and click
[Update].
8. Click [OK] to close the NDPS Printer dialog box.
Configuring the queue based connection in the IPX/SPX network
1. In the Configure Port Handler for Printer Agent dialog box,
select “Forward Jobs to a Queue” and click [Next].
2. Enter the NDS queue name in the “Queue Name” field and the
user name in the “Queue User Name” field. Then click [Fin-
ish].
• The Select Printer Drivers dialog box appears.
3. Select the printer drivers to be installed in the “Printer Driv-
ers” list at each OS tab, and click [Continue].
• The Information dialog box appears.
4. Click [OK].
• It takes about 60 seconds to complete the creation of the NDPS
Printer object.
5. Double-click the NDPS Printer object that you created.
• The NDPS Printer dialog box appears.
6. Click [NDPS Remote Printer Management].
7. Check the “Install to workstation in this container” and click
[Update].
8. Click [OK] to close the NDPS Printer dialog box.
To Next Page
Loading...
