190 Network Administrator’s Guide — Troubleshooting Overview
IPP Printing in a Windows Operating System Environment:
Novell Printing in a NetWare Environment:
2 Is the LPR/LPD Printing cor-
rectly set?
Next Step
Ø
Ö
Setup the LPD print service cor-
rectly.
P.91 "Setting up the LPD
Print"
3 Were the proper printer driv-
ers installed?
Next Step
Ø
Ö
See the Printing Guide to install
proper printer drivers.
4 Is the LPR port configured
with correct IP address?
Next Step
Ø
Ö
See the Printing Guide to config-
ure the proper port.
5 Can you print to this equip-
ment?
End Ö
Refer to following section to
troubleshoot the condition.
P.205 "Cannot Print To This
Equipment"
No Check... Yes No For Instruction, Go To...
1 Are the IP Address properties
correctly set?
Next Step
Ø
Ö
Setup the IP address correctly.
P.53 "Setting up the TCP/IP"
2 Is the HTTP Server on this
equipment enabled?
Next Step
Ø
Ö
Enable the HTTP server in the
HTTP Network Service.
P.58 "Setting up the HTTP
Network Service"
3 Is the IPP Printing correctly
set?
Next Step
Ø
Ö
Setup the IPP print service cor-
rectly.
P.92 "Setting up the IPP
Print"
4 Were the proper printer driv-
ers installed?
Next Step
Ø
Ö
See the Printing Guide to install
proper printer drivers.
5 Is the IPP port configured
with correct URL?
Next Step
Ø
Ö
See the Printing Guide to config-
ure proper port.
6 Can you print to this equip-
ment?
End Ö
Refer to following section to
troubleshoot the condition.
P.205 "Cannot Print To This
Equipment"
No Check... Yes No For Instruction, Go To...
1 Are the IPX/SPX protocol
enabled? Is the correct frame
type selected?
Next Step
Ø
Ö
Setup the IPX/SPX correctly.
P.54 "Setting up the IPX/
SPX"
No Check... Yes No For Instruction, Go To...
To Next Page
Loading...
