Network Administrator’s Guide — Setup Flow for Fax Features 43
configure the TCP/IP and HTTP Network Service from the Touch Panel Display, or from
TopAccess.
P.53 "Setting up the TCP/IP"
P.58 "Setting up the HTTP Network Service"
Step 3: Setting up the DNS Session.
You should set the DNS Session to specify the DNS server.
P.56 "Setting up the DNS Session"
Step 4: Setting up the DDNS Session, if required.
If the DNS server supports dynamic DNS service, configure the DDNS Session to enable the
dynamic DNS service.
P.56 "Setting up the DDNS Session"
Step 5: Setting up the SMTP Network Service.
You should enable the “Enable SMTP Server” and “Enable OffRamp Gateway” option to
receive Emails through the SMTP transmission and perform the Offramp Gateway transmis-
sion. Also you can specify the SMTP server settings as you require.
P.59 "Setting up the SMTP Client"
Step 6: Setting up the Fax Settings.
Set the Fax device settings to enable the facsimile transmission from this equipment. This is
available only when the optional Fax unit is installed. Please see the User Functions Guide
to configure the Fax Settings from the Touch Panel Display, or from TopAccess.
P.70 "Setting up the Fax Settings"
To Next Page
Loading...
