2. Scan to e-Filing
Scanning Guide — How to Perform Scan to e-Filing 23
3. Press the [SCAN TO E-FILING] button.
• The SCAN TO E-FILING screen is displayed.
4. Press the [BOX/FOLDER] button.
• The box list screen is displayed.
5. Select the box in which you want to store the data and press
the [ENTER] button.
• Select either the “Public Box” button or desired user box button.
• If the user box that you want to store the data is not shown in the list, press
the [Next] or [Prev] buttons to change the list on the screen.
SUPPLEMENT: If the user box that you want to store the data has not been registered, you must regis-
ter the user box first. For setting up the user boxes, see e-Filing Guide. (The instruc-
tion on how to set up the user boxes using the touch panel also describes in Operator’s
Manual for Basic Function.)
To Next Page
Loading...
Need help?
General
