© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 5
1
1.3 Options
1.3.1 e-STUDIO350/450
* 1) N: North America E: Europe F: France S: Sweden
Notes:
1. The bridge unit (KN-3520) is necessary for installation of the finisher (MJ-1022, MJ-1023 or
MJ-1024).
2. The finisher (MJ-1023 or MJ-1024) is necessary for installation of the hole punch unit
(MJ-6004N/E/F/S).
3. The PCI slot (GO-1030) is necessary for installation of the scrambler board (GP-1030).
Platen cover KA-3511PC/PC-C
Reversing Automatic Document Feeder (RADF) MR-3015
Drawer module MY-1021/-C
Paper Feed Pedestal (PFP) KD-1011/-C
Large Capacity Feeder (LCF) KD-1012 A4/LT/A4-C
Finisher (Hanging type) MJ-1022/-C
Finisher (Console type) MJ-1023/-C
Finisher (Console saddle stitcher type) MJ-1024/-C
Hole punch unit MJ-6004 N/E/F/S *1
Staple cartridge STAPLE-1600 (for MJ-1022)
STAPLE-2000 (for MJ-1023/1024)
STAPLE-600 (for MJ-1024)
Bridge kit KN-3520/-C
Job Separator MJ-5004/-C
Offset Tray MJ-5005/-C
Key Copy Counter MU-8, MU-10
Work Tray KK-3511
Damp Heater MF-3520 U/E
Fax Board GD-1150 NA/AU/EU/TW/C/AS
2nd Line for Fax Board GD-1160 NA/EU/TW/C
Wireless LAN Adapter GN-1010
PCI slot GO-1030
Scrambler board GP-1030
Printer Kit GM-1010
Printer/Scanner Kit GM-2010
Scanner upgrade Kit GM-3010
Desk MH-1700
Data overwrite kit GP-1050
05/11
To Next Page
Loading...
