Toshiba e-Studio 350 - Thick Paper;Middle Size; Middle Size; Short Size; Thick ALL

e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 54
467 Paper
feeding
Adjustment of paper push-
ing amount/Duplex feed-
ing (short size)
ALL 128
<0-255>
M When the value
increases by “1”, the
driving speed of ADU
transport roller
increases by approx.
0.2 ms when the paper
transport is started
from the registration
section.
1
468-0 Finisher Fine adjust-
ment of bind-
ing position/
folding posi-
tion
A4-R/LT-R ALL 0
<-14-14>
M When the value
increases by “1”, the
binding/folding position
shifts toward the right
page by 0.25 mm.
4
468-1 B4 ALL 0
<-14-14>
M4
468-2 A3/LD ALL 0
<-14-14>
M4
469-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Upper
drawer)
Thick
Paper 1
Long
size
ALL 20
<0-63>
M When the value
increases by "1", the
aligning amount
increases by approx.
0.8 mm.
<Paper length>
Long size:
330 mm or longer
Middle size:
220 mm to 329 mm
Short size:
219 mm or shorter
4
469-1 Thick
Paper 1
Middle
size
ALL 20
<0-63>
M4
469-2 Thick
Paper 1
Short
size
ALL 20
<0-63>
M4
469-3 Thick
Paper 2
Long
size
ALL 20
<0-63>
M4
469-4 Thick
Paper 2
Middle
size
ALL 22
<0-63>
M4
469-5 Thick
Paper 2
Short
size
ALL 19
<0-63>
M4
470-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Lower drawer
/ Thick paper
1)
Long
size
ALL 20
<0-63>
M4
470-1 Middle
size
ALL 22
<0-63>
M4
470-2 Short
size
ALL 19
<0-63>
M4
471-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(PFP upper
drawer / Thick
paper 1)
Long
size
ALL 20
<0-63>
M4
471-1 Middle
size
ALL 22
<0-63>
M4
471-2 Short
size
ALL 19
<0-63>
M4
Adjustment mode (05) <e-STUDIO350/450>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e