Toshiba e-Studio 350 - Page 73

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 53
2
458-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Bypass feed-
ing/Plain
paper)
Long
size
ALL 26
<0-63>
M When the value
increases by “1”, the
aligning amount
increases by approx.
0.8 mm.
<Paper length>
Long size:
330 mm or longer
Middle size:
220 mm to 329 mm
Short size:
219 mm or shorter
* Postcard is sup-
ported only for JPN
model.
4
458-1 Middle
size
ALL 26
<0-63>
M4
458-2 Short
size
ALL 25
<0-63>
M4
460-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Bypass feed-
ing/Thick
paper 1)
Long
size
ALL 26
<0-63>
M4
460-1 Middle
size
ALL 26
<0-63>
M4
460-2 Short
size
ALL 26
<0-63>
M4
461-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Bypass feed-
ing/Thick
paper 2)
Long
size
ALL 17
<0-63>
M4
461-1 Middle
size
ALL 17
<0-63>
M4
461-2 Short
size
ALL 17
<0-63>
M4
462-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Bypass feed-
ing/Thick
paper 3)
Long
size
ALL 17
<0-63>
M4
462-1 Middle
size
ALL 17
<0-63>
M4
462-2 Short
size
ALL 17
<0-63>
M4
462-3 Post
card
ALL 14
<0-63>
M4
463-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Bypass feed-
ing/OHP film)
Long
size
ALL 26
<0-63>
M4
463-1 Middle
size
ALL 26
<0-63>
M4
463-2 Short
size
ALL 26
<0-63>
M4
466-0 Paper
feeding
Adjustment of
paper push-
ing amount /
Bypass feed-
ing
Plain
paper
ALL 143
<0-255>
M When the value
increases by “1”, the
driving speed of bypass
feed roller increases by
approx. 0.2 ms when
the paper transport is
started from the regis-
tration section.
* Post card is sup-
ported only for JPN
model.
4
466-1 Post card ALL 173
<0-255>
M4
466-4 Thick
paper 1
ALL 143
<0-255>
M4
466-5 Thick
paper 2
ALL 143
<0-255>
M4
466-6 Thick
paper 3
ALL 143
<0-255>
M4
466-7 OHP film ALL 128
<0-255>
M4
Adjustment mode (05) <e-STUDIO350/450>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e