e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
REMOTE SERVICE
8 - 2
8.1.2 Setting Item
To enable Auto Supply Order, the following settings are required.
Note: Note:
When selecting E-mail to place an order, it is required that sending and receiving E-mails are
available. Confirm the details to the administrator.
(1) Self-diagnosis (08) Setting
As the default setting, the Auto Supply Order setting screen is not displayed on the touch panel.
To display it, switching the Valid/Invalid setting (08-765) is required.
0: Valid (FAX/Internet FAX)
1: Valid (FAX/Internet FAX/HTTP)*
2: Invalid (Default)
When changing the setting value from "2" (default) to "0", the Auto Supply Order setting screen is
displayed. (* HTTP has not been supported yet.)
04/05
To Next Page
Loading...
