© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3 - 35
3
[ 1-2 ] Connection
(1) Connection for developer bias adjustment
Fig. 3-29
(20) Fix the front door switch to be closed with the
door switch jig.
Fig. 3-28
(21) After the adjustment, remove the jigs in a
reverse procedure to return it to the original
state.
Door switch jig
Front cover
opening/closing switch
(–) terminal:
Connected to the machine frame
(+) terminal:
Connect in the hole at the front
side of the developer unit
To Next Page
Loading...
