e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
TROUBLESHOOTING
5 - 130
22) Blotched image
Defective area Step Check items Prescription
Paper 1 Is the paper type corresponding to
its mode?
Check the paper type and mode.
2 Is the paper too dry? Change the paper.
Separation 3 Is the output from the separation
charger too high?
Adjust the output.
Transfer 4 Is the transfer charger case dirty? Clean the case.
5 Is the transfer charger wire dirty? Clean the wire.
High-voltage trans-
former
(Transfer charger)
6 Is the output from the high-voltage
transformer normal?
Adjust the output. Replace the transformer
if necessary.
Feeding direction
06/09
To Next Page
Loading...
