Toshiba E-STUDIO 3510C Quick Start Guide

CONNECTING TO THE NETWORK 27
CONNECTING TO THE NETWORK
The following describes how to connect this equipment to a network.
The 10BASE-T or 100BASE-TX cable is an optional item. Please obtain one that is compatible
with your network.
1
Insert the 10BASE-T or 100BASE-TX
cable to the network interface connec-
tor located on the rear side of the
machine body.
2
Turn ON the power of this equipment.

Toshiba E-STUDIO 3510C Specifications

General

Brand	Toshiba
Model	E-STUDIO 3510C
Category	All in One Printer
Language	English