5 SETUP FLOW
70 SETUP FLOW FOR SCANNING FEATURES
Setup Flow for Remote Scan
This equipment provides the Remote Scan driver that allows users to operate scanning remotely
from the Windows computer and import the scanned images into a TWAIN-compliant applica-
tion.
The Remote Scan driver can connect to this equipment over TCP/IP network.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the IPv6 Protocol”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Install the Client Software Install the Remote Scan driver from the Client Utilities CD-ROM.
Reference: Scanning Guide
y Chapter 8 “REMOTE SCAN”
“Installing Remote Scan Driver”
Connecting over TCP/IP Network
Remotely operate scanning
using Remote Scan driver
Retrieve scanned images
into TWAIN compatible application
Originals
Windows 2000
To Next Page
Loading...
Need help?
General
