5 SETUP FLOW
58 SETUP FLOW FOR PRINTING FEATURES
Setup Flow for UNIX Workstation
This equipment supports printing for UNIX workstations using the UNIX Filters or CUPS.
Setup Flow for LPR Printing
This equipment provides the UNIX filters to print from UNIX workstations. You can perform LPR
printing from the UNIX workstation using the UNIX filters.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the IPv6 Protocol”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Set up the Printing Ser-
vice
Enable the LPD Printing Service using TopAccess.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Print Service Settings”
“Setting up the LPD Print”
UNIX workstation
Connecting over TCP/IP Network
Setting up the LPR
printer connection
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
To Next Page
Loading...
Need help?
General
