SETUP FLOW FOR PRINTING FEATURES 43
Setup Flow for SMB Printing
This equipment can be used with SMB printer connection that allows you to connect to this
equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the
common method to setting up the printer from the Windows 98/Me computers. However, SMB
printing is not suitable for printing a large amount of documents.
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows
2000, Windows XP, Windows Server 2003, or Windows Vista as a print server, it is recom-
mended to set up for printing via Windows print server.
P.47 “Setup Flow for Printing via Windows Print Server”
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Network Environment over TCP/IP
Setting up SMB
Printer Connection
Ð
Ð
Ð
To Next Page
Loading...
Need help?
General
