Toshiba E-STUDIO 3510C - Setup Flow for Printing Via Windows Print Server

SETUP FLOW FOR PRINTING FEATURES 47
Setup Flow for Printing via Windows Print Server
When you want to manage all print jobs in the print server instead of directly printing to this
equipment, the Microsoft’s Client Server network solution is helpful. In this case, an administra-
tor sets up the sharing printer using Raw TCP or LPR printing in Windows NT 4.0, Windows
2000, Windows XP, Windows Server 2003 or Windows Vista. Then clients can install the printer
driver from the Windows print server using SMB printing.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the IPv6 Protocol”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Connecting to Client Server type of Microsoft network
Setting up the Raw TCP
or LPR connection
Setting up the SMB
printer connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows Vista

Ð

Ð
Ð

Ð

Ð
Ð
