Toshiba e-STUDIO 450 - FEATURES of the E-STUDIO350;450

9
FEATURES OF THE e-STUDIO350/450
The e-STUDIO350/450 is a Multifunctional Digital Systems that is capable of using each function via
networks. The e-STUDIO350/450 also has various optional paper handling devices to meet the needs of
your office.
The e-STUDIO350/450 offers the following convenient features, functions and options.
- The copying speed is 35 copies (A4) per minute for e-STUDIO350, 45 copies (A4) per minute for the e-
STUDIO450.
- Warm-up time has been drastically shortened to approximately 20 seconds.
- An all-in-one controller is installed to perform the effective network functions.
(To use the print, scan and Internet Fax functions, optional printer kit, scanner upgrade kit, printer/scanner
kit, etc. are required.)
- The input/output interface is designed for internet connection (access) environment.
- A 1/2 VGA wide panel improves operability and efficiency.
- A universal design is adopted for the control panel whose angle can be changed.
- The e-Filing function allows you to scan, save, reuse, and re-edit the original data via client PCs from the
scanning section.
- Received Fax documents can be stored in the e-Filing without printing them.
(Optional FAX board is required.)
- Scanned originals can be sent via Fax and E-mail simultaneously.
(To send them via Fax, optional FAX board is required. To send them vial E-mail, optional printer/scanner
kit or both printer kit and scanner kit is required.)
- Electric sorting improves copying productivity.
- Comes with rich editing functions such as trimming, masking and mirror.
- Loading the page memory and hard disc as standard equipment enables 2 in 1/4 in 1, Electronic sorting
and magazine sorting, etc.
- A fixing system that uses less oil reduces the amount of oil affixed to the paper.
- By simply replacing the cartridge, you can add toner without dirtying your hands.
- A wide variety of media from thick paper (up to 209 g/m
2
), sticker labels, OHP films, etc. is acceptable.
- Installing an optional finisher offers quick automatic sorting, stapling and hole punching (optional) of
copies.
- Installing a finisher with an optional saddle stitching function attached allows you to select the saddle
stitching mode which will automatically staple the centre of the documents just like a book.
- When configured as a copier only, the auto shutoff feature will turn off the power switch on the machine.
When the optional printer/scanner kit, both printer kit and scanner upgrade kit, or Fax board is installed,
the machine will enter a Sleep mode and will re-activate when a job is received.