29
1
Clearing the Functions Selected
If you press any button that is half-tone shaded, the function selected is cleared. Also, if the copier is left
inactive for a while, the automatic function clear works and the setting will be cleared.
- Automatic Function Clear
Even if you do not press the [FUNCTION CLEAR] button, within the specified period of time (default
setting: 45 seconds) after outputting is finished or after the last button is pressed in a procedure, the
automatic function clear mode will work to clear all settings, and the basic screen of the copy function will
be displayed. While the department management function is being operated, the display returns to the
department code input screen.
The period for the automatic function clear is selectable. (See the [User Functions Guide].)
To Next Page
Loading...
