Toshiba e-STUDIO 450 - Setting the [OTHER SIZE] Button

69
3
Setting the [OTHER SIZE] button
When the original or the paper size is specified and you want to use the paper size not displayed on the
menu (except for non-standard size), press the [OTHER SIZE] button to select the size. This function allows
the [OTHER] button to recognize the size you use.
- The initial setting for this button is COMP.
1
Press the [ZOOM...] button to enter the
setting menu of the original or paper size,
and then press the [OTHER SIZE] button.
2
Press the [PAPER SIZE] button of the
paper corresponding to the size that will
be used.
- If you select 'LT', the [OTHER] button (for both the original and the
paper size) is recognized as LT size.