268
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
6.ADDING STAPLES (OPTIONAL) (Cont.)
12
3
Take out the empty staple case from the
staple cartridge.
4
Pull out the seal holding the staples.
- Be careful that the staples are not misaligned.
5
Push the new staple case into the staple
cartridge until it clicks.
6
Return the staple cartridge to its original
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
7
Close the front cover of the finisher.
If “Check staple cartridge” remains, repeat the above procedure
from step 1 to 7.
To Next Page
Loading...
