274
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.)
12
3
Lower the staple cover while holding the
knob.
-A: stapler
Do not touch the stapling area. The stapler could injure you.
4
Remove any jammed staples.
5
Return the staple cover to its original
position while holding the knob.
6
Return the staple cartridge to its original
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
7
Close the front cover of the finisher.
(
A
)
To Next Page
Loading...
