Toshiba e-STUDIO 450 - Disposing of Punched Paper Bits; Emptying Hole Punch Dust Bin

278
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.)
12
Single-staple Finisher (MJ-1022)
1
Pull the lever and move the finisher away
carefully from the equipment.
2
Take out the staple cartridge.
3
Lower the staple cover while holding the
knob.
-A: stapler
Do not touch the stapling area. The stapler could injure you.
4
Remove any jammed staples.
(
A
)