302
14.SPECIFICATIONS & OPTIONS
2.SPECIFICATIONS OF OPTIONS (Cont.)
14
* The paper mentioned above is Toshiba-recommended paper. Specifications and appearance are subject
to change without notice in the interest of product improvement.
Offset Tray
Model Name MJ-5005
Acceptable Paper Size A3, A4, A4-R, B4, B5-R, FOLIO, LD, LG, LT, LT-R, COMP
Acceptable Paper Weight
50-209 g/m
2
Loading Capacity
39 mm (250 sheets)
*1
*1.Values in parentheses is the number of 80 g/m
2
sheets.
Shift Amount Approx. 30 mm
Power Source Supplied from the multifunctional digital systems
Dimensions 500 mm (W) x 415 mm (D) x 169 mm (H)
Weight Approx. 3.5 kg
Hole Punch Unit
Model Name MJ-6004
Acceptable Paper Size A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP
Acceptable Paper Weight
60-256 g/m
2
(OHP film and specially treated paper are not available)
Dimensions 112 mm (W) x 617 mm (D) x 378 mm (H)
Weight Approx. 9 kg
Number of punch holes and hole
diameter
Available paper sizes
Japan and most of Europe
MJ-6004E
2 holes (6.5 mm dia.) A3, A4, A4-R, B4, B5, B5-R,
FOLIO, LT, LT-R, LD, LG, COMP
France
MJ-6004F
4 holes
(6.5 mm dia.; 80 mm pitch)
A3, A4, LD, LT
Sweden
MJ-6004S
4 holes
(6.5 mm dia.; 70,21 mm pitch)
A3, A4, A4-R, B4, B5, B5-R,
FOLIO, LD, LG, LT, LT-R, COMP
To Next Page
Loading...
