Toshiba e-STUDIO 450 - 2. Setting Originals; Original Types, Sizes, and Capacity

43
2
5
Press the drawer button corresponding to
the one in which the paper size has been
changed, and then press the button
indicating the new paper type.
- If you want to select the [COVER] or [INSERT] button, make sure
that paper with the same size as that for the COVER or INSERT
is set in the other drawer including the optional large capacity
feeder.
- Press [THICK 1] depending on the paper weight of the cover
sheet, sheet insertion, and special sheet.
In the case of cover sheet or sheet insertion, is displayed in
the drawer button corresponding to the one in which the paper
has been set.
* For example, when inserting 90 g/m
2
paper, press the
[INSERT] button, and press the [THICK 1] button.
- The setting is completed as shown on the right.