63
2
3
Press the desired memory number
button.
- When the paper size is '0 mm', the selected memory number
button is vacant.
- When the paper size is displayed, a non-standard size is already
stored in the selected memory number. To delete the settings,
follow step 4. New settings will be rewritten and stored on that
memory number.
4
Key in each dimension using the digital
keys, and then press the [MEMORY]
button.
- Key in the length and press the [SET] button. Similarly, set the
value for the width.
- The paper size is stored in the highlighted Memory Number.
To Next Page
Loading...
