Toshiba e-STUDIO 450 - 2-Sided Originals to 1-Sided Copies; 2-Sided to 1-Sided Copying

89
3
1. 1-Sided Originals to 1-Sided Copies (default setting)
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER"  Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS"  Page 45
3
Confirm that the [1 1 SIMPLEX] mode is
selected in the basic menu.
- If the “1-SIDED 1-SIDED” mode is not selected, press the
button (highlighted) in the menu on the right, and then press the
[1 1 SIMPLEX] button on the next screen.
z Select other copy modes as required.
4
Press the [START] button.
2. 1-Sided Originals to 2-Sided Copies
The use of Image Direction will create the booklet output when copying landscape oriented originals. See
"14.DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1”"  Page 130 for details.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER"  Page 36
- When using this mode in bypass copying ("Bypass Copying" 
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS"  Page 45