e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
2 - 77
2. Copier-specific Adjustments
To make background lighter
(a) Enter the adjustment mode [05]. Increase the values for codes [7279] and [7280] to make the
background lighter.
Color mode
Density
mode
[05] code Recommended value
Acceptable
range value
Default
Automatic 05-7279
Black
Manual 05-7280
Set 128 or larger. 0 to 255 128
* Set the value in increments of approximately 25, while checking the copy image until the optimum
value is obtained.
Cautions after the adjustment
Nothing in particular
To Next Page
Loading...
