e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 124
3. Printer-specific Adjustments
3.26 To Switch Overprint (Overlaid) Images
Overprint: OFF Overprint: ON
When more than one color is overlaid, the
color on the top is printed.
When more than one color is overlaid, mixed
colors are printed.
Explanation
Whether multiple colors overlaid on one area are printed in mixed colors or printed separately can be switched
when PDF files containing an overprint command are printed in USB direct print.
Procedures
* The service technician must perform all adjustments.
* This adjustment will be effective only when PDF files containing an overprint command are printed in USB
direct print.
(1) Enter the adjustment mode [08]. Change the value for the code [8513] to switch the overprint setting ON or
OFF.
[08] code Subcode Recommended value
Acceptable
value range
Default
08-8513 0
Switch the value as follows according to the user’s
request:
0: Overprint OFF
1: Overprint ON
2: Overprint ON only for PDF/X files
0 to 2 2
* PDF/X – A standard for printing PDF files. If a PDF file is created in a PDF/X format, this file is called a
PDF/X file.
To Next Page
Loading...
