Toshiba e-studio 4540c - To Print in Desired Color Balance (How to Use Color Editor)

e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 25
6. Printer-specific Adjustments (GA-1211)
6.3 To Print in Desired Color Balance (How to Use Color Editor)
Normal procedure Effective procedure
When a profile is re-adjusted, printing must be
repeated as well.
The image adjusted with Color Editor can be
easily printed by saving a file for adjustment
in the hold queue as a PS file. (Only the
sequence of the red arrows is repeated.)
Calibration
Set profiles
Color Editor
Store adjustment result
Adjust colors
Printer Driver
Check result
Select profile
Application
File for adjustment
Execute print command
Open the file
Re-adjust
Print
Printer Driver
Command
WorkStation
Hold queue
Calib.ps
Rename
xxxx.ps
Color Editor
Adjust colors
Check result
Re-adjust
Test print
Download
Delete PPD data
Print PS file
xxxx.ps
Application
File for adjustment
Execute print command
Open the file