Toshiba e-studio 4540c - To Adjust Sharpness Level of Image

e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 43
6. Printer-specific Adjustments (GA-1211)
6.8.1 To Adjust Sharpness Level of Image
 Procedures
* Both the service technician and the user can perform all adjustments.
* All the adjustments will be effective only when images are printed with a PS3 printer driver in the Full color
mode.
(1) Open the printer driver properties and then click [Image] icon on the [Fiery Printing] tab page.
(2) Change the sharpness level to the desired one in the Sharpness setting.
• 0: Center (default)
• +1 ~ +4: Sharper (“+4” is for the sharpest)
• -1 ~ -4: Softer (“-4” is for the softest)
 Precautions after the completion of the adjustment
Nothing in particular.
(2)
(1)