Toshiba e-studio 4540c - To Adjust Sharpness

e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 42
6. Printer-specific Adjustments (GA-1211)
6.8 To Adjust Sharpness
Before the adjustment
Printed normally
After the adjustment After the adjustment
The image looks sharper. The image looks softer.
 Explanation
To print images to be sharper or softer depending on the original, the sharpness setting on the printer driver must
be changed, or the service technician must adjust the default setting of the sharpness level in the adjustment mode
[05].
 Procedures
* Procedures to follow vary depending on whether you would like to adjust the sharpness level of the image or
change the default setting of the sharpness level. Refer to the procedure most suited to your needs.