e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 37
3. Printer-specific Adjustments
Procedures
* Both the service technician and the user can perform all adjustments.
(1) Change the "Sharpness" option on the printer driver.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Uncheck the "Use Sharpness Filter" checkbox in the "Image Attribute" tab. To make a softer image, check
its checkbox and then set the value within a range of "-1" to "-4."
• Setting "-4" provides the smoothest (softest) image.
The value "OFF" of sharpness intensity adjustment is positioned as shown below.
PCL6 PS3 XPS
To Next Page
Loading...
