e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 51
3. Printer-specific Adjustments
Mac
For Macintosh
* This adjustment will have an effect only on full-color printing.
Open the print dialog box. Set the value for "Sharpness" within a range of "1" to "4."
• Setting "+4" provides the sharpest print image.
* Initially, set "4" and check the printout. If further image quality adjustments are still necessary, refer to
<Hint> to do this.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS Menu
10.2.x "Printer Features" Ö "Feature Sets: Color settings 4" Ö "Sharpness"
10.3.x / 10.4.x/10.5x "Color Settings 2" Ö "Sharpness"
<Hint> In addition to the sharpness adjustment, decreasing "Brightness" (moving to the [-] side),
changing "Contrast" or increasing "Saturation" (moving to the [+] side) may improve the image
quality.
After changing the option on the printer driver, print and check the print image quality.
If further image quality adjustments are still necessary, use the next procedure.
To Next Page
Loading...
