e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
5 - 15
5. Scanning-specific Adjustments
Procedures
* The service technician must perform all adjustments.
(1) Enter adjustment mode [05]. Change the values for codes [8315 to 8317] to adjust the black density of a
scanned-in image.
Color mode Original mode [05] code Recommended value
Acceptable
value range
Default
Text 05-8315
Printed image 05-8316
Full color
Photo 05-8317
Set a value larger than 0. 0 to 4 0
* Setting "0" provides the lightest black, while setting "4" the darkest.
Precautions after the completion of the adjustment
The adjustment may possibly provide the extremely dark background. Therefore, carefully perform the
adjustment, while checking the scanned-in image.
To Next Page
Loading...
