e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 12
6. Printer-specific Adjustments (GA-1211)
(9) Confirm that the created profile is displayed on the Output Profile field of the Profile Manager.
* The settings above are necessary for preparation of the calibration for Thick 2 Paper. Repeat the procedure if
required to create profiles Thick 3 or 4 Paper or Recycled Paper.
Precautions after the completion of the adjustment
Do not forget to uncheck [Apply to all calibration sets] of Calibrator.
To Next Page
Loading...
