e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 27
6. Printer-specific Adjustments (GA-1211)
(5) Click the [PostScript] tab.
(6) Change “PostScript (optimized for speed)” to “Archive format” for “PostScript Output format”.
* PPD data are deleted by selecting “Archive format”.
(7) Click [OK] to print the file.
(8) When the printing of the file is finished, the finished print job will be accumulated on the Printed Job list at
the bottom of the Command WorkStation menu. Select this file and right-click the icon of the file. Then select
“Hold” on this menu or “Hold” on the toolbar in order to move the selected file to the hold queue.
(7)
(5)
(6)
To Next Page
Loading...
