e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
2 - 20
2. Copier-specific Adjustments
(2) Enter the adjustment mode [05]. Change the values for the following codes below to adjust the density level
of the background.
* The highlighted area will become highly visible, if the background density is increased.
Color mode Original mode [05] code
Recommended
value
Acceptab
le value
range
Defaul
t
Text/Photo 05-7656
Text 05-7657
Full color / Auto color
(when judged as color)
Printed Image 05-7658
Photo 05-7659
Map 05-7660
Full color
User custom 05-7661
Set 127 or smaller.
Text/Photo 05-7676
Text 05-7677
Auto color
(when judged as black)
<Automatic adjustment>
Printed Image 05-7043 *1
Text/Photo 05-7678
Text 05-7679
Auto color
(when judged as black)
<Manual adjustment>
Printed Image 05-7048 *2
Text/Photo 05-7033
Text 05-7034
Photo 05-7043 *1
Image
smoothing
05-7044
Black
<Automatic adjustment>
User custom 05-7279
Text/Photo 05-7041
Text 05-7042
Photo 05-7048 *2
Image
smoothing
05-7049
Black
<Manual adjustment>
User custom 05-7280
Text/Photo 05-7754
Text 05-7755
Printed Image 05-7756
Photo 05-7757
Mono color
Map 05-7758
Text/Photo 05-7759
Text 05-7760
Twin color
Printed Image 05-7761
Set 128 or larger.
0 to 255 128
*1 and *2 are common settings.
To Next Page
Loading...
