IPedge
SoftIPT
28 TOSHIBA
IPedge UG 12/15
Fixed Buttons The fixed buttons on your telephone enable you to perform standard functions
quickly and easily. These buttons are described in Chapter 2 – The Basics.
Flexible Buttons All Flexible Buttons must be programmed for your telephone in system
programming and vary for individual telephones. If a button does not appear
on your display or telephone keystrip label, see your System Administrator for
button assignments.
Line Buttons You may have buttons designated as Line and/or Pooled Line Grp which
enable you to directly access outside lines. Pooled Line Grp enables you
to access available CO Lines from a group of lines appearing under one
button.
Liquid Crystal
Display
The Liquid Crystal Display (LCD) on the SoftIPT will display information
similar to the large 9-line IP telephone display:
• Desk Clock and Calendar in idle mode
• Call Duration during an outside call
•
Operational, Advisory, and Notification messages
LCD Control Buttons There are two types of LCD button functions: LCD Control Buttons and Soft
Keys.
When the Soft Key prompts appear on the LCD, the LCD Control Button just
below the prompt offers access to that feature.
SoftIPT Configurations – Double click this icon to open the
Configuration window. This enables you to view and change SoftIPT
settings.
Audio Settings – Click this button to adjust the audio properties when
connected to a USB handset.
Help – Clicking this icon enables you to access Help as a user or find
information on Setting Audio Properties, etc. Click Help to view all
SoftIPT information.
Shift Button (Purple) – Press Shift at any time to alternate between
display of feature keys 1~10 and feature keys 11~20.
Table 6: SoftIPT Button Definitions (continued)
Button Definitions
To Next Page
Loading...
