IPedge
IPMobility Application
IPedge UG 12/15 TOSHIBA 93
• Dial Using callback will require the user to confirm each incoming or
outgoing call by pressing 1 or #
• Dial Using Call-thru will automatically make the call without any user
confirmation (like a normal call)
Test the Application 1. After launching the app on your mobile device, make a call to a telephone with
Caller ID capability.
2. Verify that the IPedge Caller ID or DID is displayed (not the mobile phone
number.)
Mailbox Setup
Wizard
The setup wizard will guide the user through the voice mailbox setup process.
1. Tap My Info.
2. Scroll down and tap Setup Wizard, then tap proceed to continue.
3. To create or change your voice mailbox password, enter in either field.
4. Tap Save when complete.
Note: If Save button is not visible, click anywhere on the screen background.
To Next Page
Loading...
