IPedge
Feature Operations
IPedge UG 12/15 TOSHIBA 63
Voice First
Signalling
The telephone does not ring when it is being called, rather a long tone is
heard, followed by the caller's voice coming through the speaker. This method
automatically starts in a hands free mode and allows both parties to speak
with each other.
Note: The calling party has control over whether Tone First or Voice First
Signaling is being used. The ability to switch between the two is setup
by the System Administrator.
To change the signalling method while placing the call
1. Enter the extension number
2. Press 1 to turn on Tone First Signaling.
3. Press 2 to turn on Voice First Signaling.
To Next Page
Loading...
