User’s Manual 6-17
Power and Power-Up Modes
Hot keys
You can use the Fn + F3 hot key to enter Standby Mode or Fn + F4 to enter
Hibernation Mode - please refer to Chapter 5, The Keyboard for further
details.
Panel power on/off
You can set up your computer so that power is turned off automatically
when you close the display panel, and turned on again when you open it.
Please note that this function is only available for Standby Mode or
Hibernation Mode, not for Boot Mode.
System Auto Off
This feature turns the system off automatically if it is not used for a set
period of time, and can be configured for both Standby Mode or
Hibernation Mode.
If the panel power off function is enabled, and you manually shut down
Windows, do not close the computer's LCD display panel until the shut
down process has been completed.
To Next Page
Loading...
