User’s Manual 3-14
Features, Utilities and Options
4. Grasp the SD Card and remove it.
Figure 3-4 Removing an SD Card
SD memory card
SD Cards let you easily transfer data from devices, such as digital cameras
and Personal Digital Assistants, that use SD Card flash-memory. The cards
have a high level of security and copy protection features.
Formatting an SD Card
SD memory cards are sold already formatted in conformity to specific
standards. If you format the SD Card again, be sure to format it with the
TOSHIBA SD Memory Card Format utility, not with the format command
provided within Windows.
In order to run the TOSHIBA SD Memory Card Format utility, click start
followed by All Programs followed by TOSHIBA followed by Utilities and
then click SD Memory Card Format. Please note that the TOSHIBA SD
Memory Card Format utility does not format the protected area of the SD
memory card - should you need to format all areas of the memory card,
including the protected area, you will need to obtain an appropriate
application that applies the copy protection system.
SD Card
SD Card slot
■ Make sure the SD Card indicator is out before you remove the SD Card
or turn off the computer’s power. If you remove the SD Card or turn off
the power while the computer is accessing the SD Card you may lose
data or damage the card.
■ Do not remove an SD Card while the computer is in Standby or
Hibernation Mode. The computer could become unstable or data in the
SD Card could be lost.
SD memory cards comply with SDMI (Secure Digital Music Initiative),
which is a technology adopted to prevent unlawful copy or playback of
digital music. For this reason, you cannot copy or playback protected
material on another computer or other device. You may not use the
reproduction of any copyrighted material except for your personal
enjoyment.
To Next Page
Loading...
