User’s Manual 7-10
HW Setup & BIOS Setup
Ending the BIOS Setup Program Halfway
The configuration settings can be terminated halfway without saving any of
the changes made by following the steps detailed below:
1. Press the Esc key - the Exit without saving? (Y/N) prompt to
be displayed at the bottom of the screen.
2. Press the Y key - the BIOS setup application will exit and the computer
will automatically restart.
Core Multi - Processing
The Core Multi-Processing sets the CPU operating mode.
Enabled is Dual Core mode.
Disabled is Single Core mode.
Virtualization Technology
Virtualization Technology sets enable or disable of the Intel Virtualization
Technology installed in the CPU.
Intel Virtualization Technology is the technique that allows one machine to
operate as multiple virtual machines.
The Disabled command does not allow use of the Intel Virtualization
Technology.
The Enabled command allows use of the Intel Virtualization Technology.
This option is displayed only on models with an Intel
®
Core
TM
Duo processor.
Enabled Enables Core Multi - Processing functions
(Default).
Disabled Disables Core Multi - Processing functions.
The Virtualization Technology is supported with some models.
Enabled Enables Virtualization Technology.
Disabled Disables Virtualization Technology (Default).
System configuration changes, other than changes to this setting, should
be made within Windows by using applications such as TOSHIBA HW
Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Windows
Device Manager and so forth.
To Next Page
Loading...
