User’s Manual 2-10
The Grand Tour
System indicators
LED system indicators next to their respective icons, glow when specific
computer operations are in progress.
Figure 2-7 System indicators
Fingerprint Sensor
This sensor enables you to enroll and recognize a
fingerprint.
For detailed information on Fingerprint Sensor,
refer to Chapter4, Using the Fingerprint Sensor.
LCD Sensor switch This switch senses when the computer's display
panel is either closed or opened and activates
the Panel Power Off/On feature as appropriate.
For example, when you close the display panel
the computer enters Hibernation Mode and shuts
itself down and then, when you next open the
display, the computer will automatically start up
and return you to the application you were
previously working on.
In order to set up and configure this feature you
should use the TOSHIBA Power Saver - the
default setting is 'Enabled'. Please refer to the
TOSHIBA Power Saver and Panel Power Off/On
items in Chapter 3, Special features, for
additional details on the available settings.
Do not put any magnetic objects close to this switch as they may cause the
computer to automatically enter Hibernation Mode and shut down even if
the Panel Power Off feature is disabled.
To Next Page
Loading...
