User’s Manual 8-11
Troubleshooting
CF card
For further information, please refer to Chapter 3, Features, Utilities and
Options.
Pointing device
If you are using a USB mouse, you should also refer to both the USB
device section in this chapter, and the documentation supplied with your
mouse.
Touch Pad
Problem Procedure
CF card error occurs Remove the CF card from the computer and then
reinsert it in order to ensure it is firmly connected.
If the problem persists, then you should refer to
the documentation supplied with your CF card for
further information.
You cannot read a file Check to ensure the required file is actually on
the CF card that is inserted into the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
On-screen pointer does
not respond to pointing
device operation
In this instance the system might be busy - if the
pointer is shaped as an hourglass, wait for it to
return to its normal shape and then try again to
move it.
Double-tapping does
not work
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. Click start followed by Control Panel
followed by Printers and Other Hardware
and then click the Mouse icon.
2. Within the Mouse Properties window, click
the Buttons tab.
3. Set the double-click speed as required and
click OK.
To Next Page
Loading...
