User’s Manual 4-22
Operating Basics
Using the Hard Disk Drive (HDD) Protection
This computer has an acceleration sensor function which is designed to
reduce the risk of damage on the hard disk drive. By using the Hard Disk
Drive Protection feature, the system will detect vibration, shocks, and
similar events and automatically move the hard disk drive read/write heads
to a safe position in order to reduce the risk of damage that could be
caused to the drive by head-to-disk contact.
When vibration or shock is detected, the following message will be
displayed and the icon in the notification area of the Windows Task Bar
changed to its 'protection' state - this message will be displayed for thirty
seconds or until the OK button is pressed. When the cause of the vibration
or shock has subsided or been removed, the Task Bar icon returns to its
normal state.
Figure 4-5 TOSHIBA HDD Protection Message
Taskbar Icon
■ Please be aware that this function does not guarantee that the hard
disk drive will not be damaged.
■ The secondary hard disk drive is not supported by the TOSHIBA HDD
protection function.
State Icon Description
Normal TOSHIBA Hard Disk Drive Protection is
enabled.
Protection TOSHIBA Hard Disk Drive Protection is
active - the hard disk drive read/write heads
are in a safe position.
OFF TOSHIBA Hard Disk Drive Protection is
disabled.
To Next Page
Loading...
