User’s Manual 3-7
Features, Utilities and Options
Utilities
This section describes the pre-installed utilities that come with the
computer and details how to start them. For further information on their
operation, please refer to each utility's online manual, help files or
README.TXT file.
Hibernation This feature lets you turn off the power to the
computer without exiting from your software. The
contents of main memory are automatically
saved to the hard disk drive so that when you
next turn the power on again, you can continue
working right where you left off. Refer to the
Turning off the power section in Chapter 1,
Getting Started, for more details.
Standby If you have to interrupt your work, you can use
this feature to allow you to turn off power to the
computer without exiting from your software.
Data is maintained in the computer's main
memory so that when you next turn on the power,
you can continue working right where you left off.
TOSHIBA Power
Saver
To access the power management utility, click
start followed by Control Panel followed by
Performance and Maintenance and then click
the TOSHIBA Power Saver icon.
HW Setup This utility allows you to customize your
hardware settings according to the way you work
with the computer and the peripherals you use.
To access this utility, click start followed by
Control Panel followed by Printers and Other
Hardware and then click the TOSHIBA
HWSetup icon.
TOSHIBA Controls This utility have a section to let you do the
following:
■ Buttons: Assign applications or functions to
the 2 buttons (TOSHIBA Assist, TOSHIBA
Presentation).
To access this utility, click start followed by
Control Panel followed by Printers and Other
Hardware and then click the TOSHIBA Controls
icon.
To Next Page
Loading...
